Stainless Steel Alloys

304 Stainless Steel Mesh

UNS S30400

Also referred to as “18-8” stainless, 304 SS wire mesh is one of the most common sorts of woven stainless steel wire cloth. 304 stainless steel wire mesh screen has excellent corrosion resistance in a wide variety of chemical and industrial atmospheres. Type 304 SS, often referred to as T-304, is non-magnetic in the annealed condition, but becomes slightly magnetic when cold worked. Heating is permitted within 900 and 1600° F. Also commonly used for welded wire mesh screen products such as architectural trim, food processing and handling, chemical handling equipment, household appliances, textile dying equipment, oil refinery still tubes, and steam piping.

Because of its popularity, it can be said that 304 SS wire cloth has become the most common and most readily available wire cloth of all materials.

304 SS Wire Mesh Fact Sheet

* Tensile strength and elongation are for annealed 0.012″ wire diameter. Please note that material performance data is provided a reference guide only… There are many factors involved in wire cloth performance, so please consult with an experienced engineer before choosing the metal best suited for your unique needs!

Typically available stock meshes of stainless steel wire cloth are to too extensive to list. Please send your request and we will be happy work out price and availability.

304L Stainless Steel Mesh

UNS S30403

304L stainless steel wire mesh is a very low carbon stainless steel with general corrosion resistance. The low carbon provides superior resistance to intergranular corrosion if welded or heated to temperatures between 800-1600°F. Type 304L, often referred to as T-304L SS, is non-magnetic in the annealed condition, but becomes slightly magnetic when cold worked. 304L stainless steel wire mesh screen is often used over 304 SS in assemblies fabricated by welding that cannot be subsequently annealed.

304L SS Wire Mesh Fact Sheet

* Tensile strength and elongation are for annealed 0.012″ wire diameter. Please note that material performance data is provided a reference guide only… There are many factors involved in wire cloth performance, so please consult with an experienced engineer before choosing the metal best suited for your unique needs!

309 Stainless Steel Mesh

UNS S30900

Sometimes referred to as “25-12”, 309 SS wire mesh is resistant to general corrosion and heat. 309 stainless steel wire mesh screen shows excellent oxidation resistance and strength at elevated temperatures. The maximum safe temperature for intermittent service is about 1800°F, and 2000°F for continuous service. It is non-magnetic when annealed, and slightly magnetic when cold worked. 309 SS wire mesh screen is often used for various furnace parts, aircraft and jet parts, heat exchangers, and chemical processing equipment and strainers.

309 SS Wire Mesh Fact Sheet

* Tensile strength and elongation are for annealed 0.012″ wire diameter. Please note that material performance data is provided a reference guide only… There are many factors involved in wire cloth performance, so please consult with an experienced engineer before choosing the metal best suited for your unique needs!

310 Stainless Steel Mesh

UNS S31000

Often referred to as “25-20″ stainless, 310 SS wire mesh is suited for applications requiring high strength and excellent oxidation resistance. The maximum safe temperature is about 2000°F, but is successfully used up to 2100°F under certain conditions. Preforms well under intermittent heating and cooling. Type 310 also refered to as T-310 or T310 is nonmagnetic when annealed or cold worked. Well suited where a combination of strength, toughness, corrosion and oxidation-resistance is essential. 310 stainless steel wire mesh screen is often used for welding rod, furnace parts, aircraft and jet engine parts, oil refinery and chemical processing equipment, heat exchangers and strainers.

310 SS Fact Sheet

* Tensile strength and elongation are for annealed 0.012″ wire diameter. Please note that material performance data is provided a reference guide only… There are many factors involved in wire cloth performance, so please consult with an experienced engineer before choosing the metal best suited for your unique needs!

314 Stainless Steel Mesh

UNS S31400

314 SS is a modified alloy containing higher silicon for maximum resistance in carburization. Type 314 SS is similar to 310 SS which is best for applications requiring high strength and excellent oxidation resistance.

314 SS Wire Mesh Fact Sheet

* Tensile strength and elongation are for annealed 0.012″ wire diameter. Please note that material performance data is provided a reference guide only… There are many factors involved in wire cloth performance, so please consult with an experienced engineer before choosing the metal best suited for your unique needs!

316 Stainless Steel Mesh

UNS S31600

316 SS wire mesh is heat resistant and contains molybdenum for superior resistance to general corrosion. 316 stainless steel wire mesh screen is particularly resistant to pitting by solutions containing chloride ions, phosphoric acid, acetic acid, sea water, and other conditions where particles are deposited on the metal surface. Can be used at temperatures up to 1600°F. Type 316 or T-316 is nonmagnetic in the annealed, and slightly magnetic when cold worked. 316 SS wire mesh screen is widely used in chemical, food, pharmaceutical, medical, refining, power plant, aircraft, photographic, textile, paper equipment and strainers.

Next to 304 SS, Type 316 SS wire cloth is the second most popular stainless steel used in weaving wire cloth.

316 SS Wire Mesh Fact Sheet

* Tensile strength and elongation are for annealed 0.012″ wire diameter. Please note that material performance data is provided a reference guide only… There are many factors involved in wire cloth performance, so please consult with an experienced engineer before choosing the metal best suited for your unique needs!

Typically available stock meshes of stainless steel wire cloth are to too extensive to list. Please send your request and we will be happy work out price and availability.

316L Stainless Steel Mesh

UNS S31603

Type 316L or T-316L is a very low carbon stainless steel containing molybdenum for superior corrosion resistance. 316L stainless steel wire mesh screen is particularly resistant to pitting by solutions containing chloride ions, phosphoric acid, sulfuric acid, and brine solutions. The general corrosion resistance is similar to Type 316 SS, but 316L SS has superior resistance to intergranular corrosion following welding. Type 316L is used over 316 in assemblies which cannot be annealed after fabrication by welding. Can be used at temperatures up to 1600°F. Type 316L wire mesh screen is nonmagnetic in the annealed, and slightly magnetic when cold worked. Like 316 SS, 316L SS wire mesh screen is widely used in chemical, food, pharmaceutical, medical, refining, power plant, aircraft, photographic, textile, paper equipment and strainers.  In salt water applications both 316 and 316L SS will show improved results over 304 and 304L SS.  

316L SS Wire Mesh Fact Sheet

* Tensile strength and elongation are for annealed 0.012″ wire diameter. Please note that material performance data is provided a reference guide only… There are many factors involved in wire cloth performance, so please consult with an experienced engineer before choosing the metal best suited for your unique needs!

317 Stainless Steel Mesh

[(UNS S31700) Cr 18-20%, Ni 11-15%, Mo 3-4%, C 0.08 max.]

ASTM A580

317 SS is a heat resisting steel and exhibits superior corrosion resistance to other grades of stainless steel when exposed to many types of chemical corrodents. This steel is particularly resistant to pitting by solutions containing chloride ions, phosphoric acid, acetic acid, sea water, and other conditions where particles are deposited on the metal surface. Type 317 has higher tensile and creep strength at elevated temperatures than the other 18-8 alloy. Can be used at temperatures up to 1700°F. It is nonmagnetic when annealed, and slightly magnetic when cold worked. Widely used in chemical, food, pharmaceutical, medical, refining, power plant, aircraft, photographic, textile, and paper equipment.

321 Stainless Steel Mesh

USN S32100

321 SS is a heat resistant steel containing titanium to form a carbide of low solid solubility for a reduced possibility of intergranular precipitation and of associated intergranular corrosion. 321 SS exhibits a high degree of resistance to corrosion and oxidation while possessing high creep strength. Type 321 is primarily used for welded construction and for parts intermittently heated within 900-1600°F. 321 SS is nonmagnetic when annealed, and slightly magnetic when cold worked. Typically used for aircraft exhaust manifolds, various jet engine parts, high temperature chemical handling equipment, and pressure vessels.

321 SS Fact Sheet

* Tensile strength and elongation are for annealed 0.012″ wire diameter. Please note that material performance data is provided a reference guide only… There are many factors involved in wire cloth performance, so please consult with an experienced engineer before choosing the metal best suited for your unique needs!

330 Stainless Steel Mesh

UNS N08330

330 SS is primarily an alloy to endure high heat and is most useful between 1500- 2150°F. It is used for its greater resistance to heat and thermal shock than other stainless steel grades. It is a corrosion resisting steel that can be used in sulfur controlling oxidizing gases up to 1900°F. In reducing or neutral sulfur free atmospheres it can be used up to 2150°F. Type 330 is nonmagnetic when annealed or cold worked. Typically used for annealing parts, carburizing boxes, and furnace parts.

330 SS Fact Sheet

* Tensile strength and elongation are for annealed 0.012″ wire diameter. Please note that material performance data is provided a reference guide only… There are many factors involved in wire cloth performance, so please consult with an experienced engineer before choosing the metal best suited for your unique needs!

347 Stainless Steel Mesh

UNS S34700

347 SS is a heat and corrosion resisting alloy stabilized by the addition of columbium and titanium. It is superior for welded construction used in both severely corrosive and elevated temperatures between 800-1500°F. Type 347 is nonmagnetic when annealed, and slightly magnetic when cold worked. Typically used for aircraft or jet engine parts, pressure vessels, fire walls, and elevated temperature chemical handling equipment.

347 SS Fact Sheet

* Tensile strength and elongation are for annealed 0.012″ wire diameter. Please note that material performance data is provided a reference guide only… There are many factors involved in wire cloth performance, so please consult with an experienced engineer before choosing the metal best suited for your unique needs!

410 Stainless Steel Mesh

UNS S41000

410 SS is the general purpose hardenable, corrosion and heat resisting steel. It readily responds to hardening and tempering operations between 1100-1350°F. With different heat treatments this steel develops excellent combinations of strength and toughness over a wide range of mechanical properties. 410 SS is resistant to dry atmospheres, fresh water corrosion, and a variety of mild acids and alkaline. It is a common choice for severe forming and cold heading operations, particularly if heat treating of the part is desirable. Type 410 is magnetic in all conditions. 410 SS has a wide variety of uses due to its good mechanical properties.

410 SS Fact Sheet

* Tensile strength and elongation are for annealed 0.012″ wire diameter. Please note that material performance data is provided a reference guide only… There are many factors involved in wire cloth performance, so please consult with an experienced engineer before choosing the metal best suited for your unique needs!

430 Stainless Steel Mesh

UNS S43000

430 SS is the most outstanding grade of the non-hardening (ferritic) straight chromium steel. Its non-hardening thermal treatment is used for heat and corrosion resistance in many conditions. The excellent corrosion resistance to nitric acid and organic acids contained in foods makes 430 the choice for many appliances, chemical or food handling equipment and decorative trim. Great for low stressed part operating at high temperatures, resistance up tp 1500°F. Type 430 is magnetic in all conditions.

430 SS Fact Sheet

* Tensile strength and elongation are for annealed 0.012″ wire diameter. Please note that material performance data is provided a reference guide only… There are many factors involved in wire cloth performance, so please consult with an experienced engineer before choosing the metal best suited for your unique needs!

17-7 PH® Stainless Steel Mesh

UNS S17700

17-7 PH stainless steel wire cloth has good workability in the annealed condition, corrosion resistance, and excellent fatigue properties. Useful for part and springs requiring strength up to 800ºF. 17-7 PH wire mesh is often used for jet aircraft components, pressure vessel fittings and strainers, missile components, and bearings.

17-7 PH® SS Wire Mesh Fact Sheet

* Tensile strength and elongation are for annealed 0.012″ wire diameter. Please note that material performance data is provided a reference guide only… There are many factors involved in wire cloth performance, so please consult with an experienced engineer before choosing the metal best suited for your unique needs!

17-7 PH is a registered trade mark of Armco Steel Corporation.

AL-6XN®

UNS N08367

AL6XN is a “super-austenitic” low carbon stainless steel. The alloy is stable to 1000°F. It exhibits excellent corrosion resistance to oxidizing environments, various acids, alkali, salt solution, seawater, crevice, stress, and overall general corrosion. AL6XN is superior for its chloride pitting resistance. Often used in pharmaceutical, marine, oil and gas, food, and chemical processing equipment.

AL-6XN® Fact Sheet

* Tensile strength and elongation are for annealed 0.012″ wire diameter. Please note that material performance data is provided a reference guide only… There are many factors involved in wire cloth performance, so please consult with an experienced engineer before choosing the metal best suited for your unique needs!

AL-6XN is a registered trademark of ATI Properties, Inc., licensed to Allegheny Ludium Corp. 

Duplex 2205 Stainless Steel Mesh

UNS S31803, UNS S32205

Duplex 2205 has excellent corrosion resistance and strength. This steel shows excellent fatigue strength. Duplex 2205 has superior resistance to crevice, pitting, erosion, and general corrosion in severe environments.

Duplex 2205 Fact Sheet

* Tensile strength and elongation are for annealed 0.012″ wire diameter. Please note that material performance data is provided a reference guide only… There are many factors involved in wire cloth performance, so please consult with an experienced engineer before choosing the metal best suited for your unique needs!