UNS N08811

Incoloy® 800 is a nickel – iron – chromium alloy with good strength and excellent resistance to oxidation and carburization in high temperature atmospheres up to 1100 degrees F. It also resists corrosion in many aqueous environments. The low carbon content helps prevent sensitization and consequent intergranular corrosion of weld heat-affected zones. Used for flue-gas scrubbers and for handling phosphoric and sulfuric acids.

Incoloy® 800 Fact Sheet

Composition[Ni 32.5%, Cr 21.0%, C .10 Max, Fe Balance]
SpecificationsASTM B408
Density0.288 lbs/in³
Tensile Strength110 Kpsi*
Melt2500° F
Max. Operating Temperature1900° F

* Tensile strength and elongation are for annealed 0.012″ wire diameter. Please note that material performance data is provided a reference guide only… There are many factors involved in wire cloth performance, so please consult with an experienced engineer before choosing the metal best suited for your unique needs!

Incoloy 800 In Stock

Wire Diameter
Open Area
Roll Width
Price / Sq. Ft.*
5 x 50.041"0.1590"63.2%37.38"$28.24
6 x 60.035"0.1317"62.4%58", 5"$33.81
8 x 80.035"0.090"51.8%52"$36.34
20 x 200.016"0.340"46.2%43"$50.69
40 x 400.010"0.0150"36.0%45", 5.5"$26.72

* Price per square foot as well as availability are subject to change, additional changes may apply.  There is a minimum order charge of $250.00 with a minimum line item charge of $125.00, smallest cut from a stock roll is 6″ x roll width.

Note that we weave wire mesh, so many other specs can be woven per request.

Incoloy is a registered trademark name of Inco Companies.